Electrical Remodeling in Puyallup, WA
The decision that costs the most if you get it wrong
Panel capacity.
A remodel almost always adds load. A new kitchen brings a bigger range, a second oven, a dishwasher, a disposal, an under-cabinet run and a couple of dedicated small-appliance circuits. An addition brings heating, lighting and outlets for a whole new part of the house. A basement conversion often brings all of it at once.
If the existing panel has no room, the choices are a subpanel, a panel replacement, or a full service upgrade. Which one you need depends on a load calculation, not on how many empty slots you can see.
We run that calculation before the design is locked, because finding out in week six that the service will not carry the plan is the version of this that costs real money. When the answer is more capacity, that becomes a panel upgrade folded into the remodel schedule rather than a separate emergency.
What our customers say
★★★★★
"Champ's Electric and Aaron did a fantastic job wiring and programming our new whole-house battery system. The work was as promised, and the diligence and professionalism were beyond expectations."
Jackson M., Google review
★★★★★
"Truly wish I could give more than 5 stars. Nate was absolutely awesome. Awesome work, quick, and seriously the best person I've ever hired to do any work for me. The only regret you will have hiring Nate is you didn't do it sooner!"
Justin S., Google review
★★★★★
"Nate is very easy to work with, knowledgeable, professional & friendly!"
Jco C., Google review
A remodel is the one time the walls are open, and that makes it the cheapest hour your house will ever get from an electrician. Everything that is painful to do later is easy right now.
We work on kitchen and bath remodels, additions, basement conversions, garage builds and whole-floor renovations across Puyallup. Sometimes we are hired directly by the homeowner. Sometimes a general contractor brings us in. Either way the electrical scope is ours to get right, and the part that matters most happens before the drywall goes back up.
Get a written electrical scope for your remodel
What we do while the walls are open
- Rough-in wiring for the new layout, including every circuit the code requires for the room you are building.
- Dedicated circuits for appliances, which is the difference between a kitchen that works and one that trips.
- Recessed lighting, under-cabinet lighting, and switching that makes sense for how you will actually move through the room.
- Bringing the existing wiring in that area up to current code, which is usually required once you open it up anyway.
- Switches and outlet replacements throughout, including GFCI and AFCI protection where it belongs.
- Wiring upgrades to any circuits feeding the remodeled space.
- Data, network and low-voltage runs, which cost almost nothing now and are a nightmare later.
- Rough-in for anything you are planning but not installing yet, from an EV charger to a future hot tub.
That last one deserves a moment. Running a conduit or a spare circuit to a location you might use in three years adds very little to today's bill.
What does a spare circuit cost while the wall is already open?
Almost nothing, and it will save you a drywall repair and a full callout the day you decide you want it.
Permits, inspections and the schedule
Remodel electrical work is permitted and inspected through the Washington Department of Labor and Industries. There is usually a rough-in inspection before the walls close and a final once the devices and fixtures are in.
We pull the permit, book the inspections, and work our schedule around the rest of the trades. The rough-in inspection is the one that holds up a job when it is missed, because drywall cannot go up until it passes, so it goes in the schedule early rather than being remembered late.
Our team (licensed technicians) does the work, and the name on the permit matches the people on site.
Working alongside your contractor
Most remodels have a general contractor running the job, and we slot in as the electrical trade. That means showing up when the schedule says, leaving the space in a state the next trade can work in, and flagging conflicts early rather than at the point where something has to be undone.
We also get called by homeowners running their own remodel. That works fine too, though the sequencing conversation becomes ours to have with you rather than with a GC.
If a job turns out to need more than the remodel scope, for example when we open a wall and find aluminum branch wiring or a section that should never have passed, we tell you straight away with a price, and you decide. We handle whole home rewires when that is genuinely what a house needs.
Frequently asked questions
When should I bring an electrician into a remodel?
At the design stage, before the layout is final. The load calculation and the panel question both change what is possible, and both are far cheaper to answer on paper than on site.
Do I need to upgrade my panel for a kitchen remodel?
Often, but not always. It depends on the total calculated load and on what is already in the panel. A load calculation gives you a real answer instead of a guess.
Will you work with my general contractor?
Yes. That is how most of our remodel work runs.
Do I need a permit for a remodel?
Yes for the electrical work, and the inspections are part of it. We handle both as part of the job.
Are you licensed?
Yes (licensed technicians).
What remodel electrical work costs
The number is driven by how many new circuits the plan needs, how far they run from the panel, whether the panel has capacity, and how much of the existing wiring in that area has to be brought up to code.
So why does a kitchen cost more to wire than a bedroom of the same size?
Because the code requires far more dedicated circuits in a kitchen, and every one of them is a separate run back to the panel.
A bathroom remodel is usually the smallest of these. A kitchen is bigger, because kitchens carry the most code-required circuits in the house. An addition is priced closer to wiring a small house, because that is effectively what it is.
You get a written scope and a written price before anything starts, and if the design changes mid-job, you get a revised number rather than a surprise at the end.
We are based in Puyallup and work throughout the surrounding area, including South Hill, Sumner and Edgewood. You can see recent projects, read what our customers have said, or get in touch here.
If you are planning a remodel, call before the walls open. That conversation is free and it is the one that saves the most.